A virtual wind tunnel for deforming airborne wind energy kites

This paper presents a quasi-steady simulation framework for soft-wing kites with suspended control unit employed for airborne wind energy. The kites are subject to actuation-induced and aero-elastic deformation and are described by a coupled aero-structural model in a virtual wind tunnel setup. Key contributions of the present work are a kinetic dynamic relaxation algorithm and a procedure to define a physically consistent initial state. For symmetric actuation, the kite is pitch-statically stable and the simulations converge to a static equilibrium state. Most soft-wing kites are not roll-statically stable and do not find a static equilibrium without a symmetry assumption, as this introduces non-zero roll- and yaw moments. Another important contribution is the introduction of a steady circular flight state that enables convergence without a symmetry assumption. By neglecting gravity, the kite can fly in a perfectly circular turning motion around the wind vector with a constant radius and constant rotational velocity without requiring active control input. In an idealized wind-aligned tether case, the difference in aerodynamic- and centrifugal force application centers makes it impossible to achieve both a force- and moment equilibrium. This was resolved by including an elevation angle that introduces a radial tether force component, which introduces a centrifugal and aerodynamic force difference. Therefore, an operating point with roll equilibrium can be found where the kite finds a static equilibrium, enabling the first quasi-steady simulations of turning flights. Simulated quantifications of soft-wing kite turning behavior, i.e., turning laws, contribute to better kite- and control design.